Versys Forum

Please login or register.

News: Join Now ! Members have access to areas that guests cannot see.


Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: wanted inner bar bit  (Read 1197 times)

0 Members and 1 Guest are viewing this topic.

Offline hairnet

  • Versys Pro
  • ***
  • Posts: 490
wanted inner bar bit
« on: Jan 26, 2012, 07:30 PM »
that the bar end goes onto

i got nailed by a scenic on  :015: the ring of kerry........

was looking at cornwall kwak site and theres no separate pieces - look like it all comes together (70 quid  :5:)

ebay no wai at the mo

ta


Offline Davy F

  • Versys Master
  • ****
  • Posts: 967
  • Bike: KTM 1190 Adv
  • City / Town: Ards
Re: wanted inner bar bit
« Reply #1 on: Jan 26, 2012, 09:09 PM »
Is that inner bit not welded into the end of the handlebar ? If I am correct, you'll not get said bit from Kawasaki. If the bars themselves are not damaged, I'd just cut the other side out and get suitable rawl bolts that'll fit into the bars.
http://www.screwfix.com/p/rawlplug-rawlbolts-m6-x-70mm-pack-of-5/60234?cm_mmc=Google-_-Datafeed-_-Screws%20Nails%20and%20Fixings-_-Rawlplug%20RawlBolts%20M6%20x%2070mm%20Pack%20of%205&gclid=CPCzw7HM7q0CFQcNtAodnkGEsA


 I wouldn't spend ?70 on a standard Kawasaki handlebar either. I'd buy a Renthal handlebar and bar ends which may end up costing nearly the same, but are a far superior handlebar.
Good luck exploring the infinite abyss

Offline hairnet

  • Versys Pro
  • ***
  • Posts: 490
Re: wanted inner bar bit
« Reply #2 on: Jan 26, 2012, 11:49 PM »
will give that a look tomorrow (its going for tyres and the screw fix is 200 yards away :D)