The Versys (2016 GT) went in for MOT, at weekend, and was nearly given a fail on account the dip beam bulb had blown. The bulb was replaced so all was well in the end.
Rather annoyingly it was discovered that the bulb had been held in place by double-sided tape. The spring clip was missing!! Short of a dismantling to see what the clip should look like - assuming the main beam bulb clip is still present - and fashioning a new spring clip, any thoughts on where I may acquire a replacement clip, or suitable alternatives to holding the bulb in place - NOT TAPE - would be most welcome.
I have ordered some spring clips but, chances are, they are not going to be identical to the OE so a minor mod or two may be required.