Versys Forum

Please login or register.

News: Join Now ! Members have access to areas that guests cannot see.



Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: Bike Paddock Stands - or straight for centre stand?  (Read 6359 times)

0 Members and 1 Guest are viewing this topic.

Offline Ateride

  • Versys Newbie
  • *
  • Posts: 5
  • Bike: Versys 650
  • City / Town: Kirkcaldy
  • Country: gb
Bike Paddock Stands - or straight for centre stand?
« on: Feb 22, 2021, 07:45 PM »
Hi,
Upgraded recently from 2005 KLE500 to 2017 Versys 650.
Paddock stands I had for old bike, are too short - in terms I cannot lift the bike by using my own weight.
For "2015 onwards" compatible stands it shows me one with front one raising by steering bar hub, like in picture.



Now, it says that height of it is 76 cm, floor to hub height is about 70 cm - is 6 cm not too low to lift tyre off the floor?

Or instead of spending £180 on set, should I go straight to buying proper centrestand (which I plan to eventually buy anyway)? In this case, any advice which one should I buy, as sometimes I hear comments that aftermarket stands legs are too close to drive chain...
« Last Edit: Feb 22, 2021, 07:46 PM by Ateride »

Offline Sylvester

  • Versys God
  • *****
  • Posts: 1349
  • Bike: Black (& Silver)
  • City / Town: Chorleywood
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #1 on: Feb 23, 2021, 09:51 AM »
I fitted a H&B centre stand to my V650 (and last year to my X300).  A bit of a fiddle to fit to the 650, but not too bad.  The hardest part is fitting the spring which really takes care and attention.  I found the H&B to be an excellent stand.
Ride as if your life depended on it.

Offline Ateride

  • Versys Newbie
  • *
  • Posts: 5
  • Bike: Versys 650
  • City / Town: Kirkcaldy
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #2 on: Feb 24, 2021, 01:22 PM »
So H&B is OK in your eyes, good enough distance from the chain?
Had to use hammer a lot to fit it in?

As for paddock stands, I'll get myself chock paddock stand for front wheel (£30-40), bobbins and adapters for rear* (another £30-40).
That will save me £100, will get an additional stand (chock) and can (hopefully) reuse stands I currently have instead selling them for fraction of price.  :celebrate:

*) swingarm have underneath tube for scottoiler on one side and a ABS cable on other, so with bobbins in I wont need to crush them everytime I  try to rise it

Offline Sylvester

  • Versys God
  • *****
  • Posts: 1349
  • Bike: Black (& Silver)
  • City / Town: Chorleywood
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #3 on: Feb 24, 2021, 02:15 PM »
*Originally Posted by Ateride [+]
So H&B is OK in your eyes, good enough distance from the chain?

Fitting the H&B to the V650 was a bit of faff, but not a massive problem.  Never had an issue with it in five years of riding.  Fitting the H&B to the X300 was a doddle.
Ride as if your life depended on it.

Offline Ateride

  • Versys Newbie
  • *
  • Posts: 5
  • Bike: Versys 650
  • City / Town: Kirkcaldy
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #4 on: Feb 24, 2021, 08:43 PM »
OK, thanks for answer! Will try that brand!

Offline NI-Jay

  • Versys Master
  • ****
  • Posts: 530
  • Slow and Steady Wins the Race!
  • Bike: V1K 2020 SE GT
  • City / Town: Coleraine
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #5 on: Mar 29, 2021, 09:59 PM »
I have a rear stand with bobbin holders going free if you want it?
Can find a way to get it shipped...

Jay
Slow is smooth and smooth is fast!
1st ever Strap-on award winner!!!
2019!!!
V650 GT 2018 (2018 - 2020)
V1K SE GT 2020 (2020 - Present)

Offline Ateride

  • Versys Newbie
  • *
  • Posts: 5
  • Bike: Versys 650
  • City / Town: Kirkcaldy
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #6 on: Mar 30, 2021, 09:49 AM »
Since " reuse stands I currently have instead selling them" turned out not to be great idea (paddock was too short to lift at end of swingarm + bobbins are even closer to centre of bike = not working), you, mister, keep talking :)
As long as THIS stand is able to lift bike, Im interested.
Whats your price?

Offline NI-Jay

  • Versys Master
  • ****
  • Posts: 530
  • Slow and Steady Wins the Race!
  • Bike: V1K 2020 SE GT
  • City / Town: Coleraine
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #7 on: Mar 30, 2021, 09:58 AM »
Mine lifted the bike just fine. Standard bobbins that K put on and the stand came from them too.

Let me know where you are and Iíll price up shipping. Thereís no cost for the stand.
I will send photos of it when I get home later this evening.
If you can make use of it then itís yours!

Jay
Slow is smooth and smooth is fast!
1st ever Strap-on award winner!!!
2019!!!
V650 GT 2018 (2018 - 2020)
V1K SE GT 2020 (2020 - Present)

Offline Sylvester

  • Versys God
  • *****
  • Posts: 1349
  • Bike: Black (& Silver)
  • City / Town: Chorleywood
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #8 on: Mar 30, 2021, 10:44 AM »
Nice!
Ride as if your life depended on it.

Offline Ateride

  • Versys Newbie
  • *
  • Posts: 5
  • Bike: Versys 650
  • City / Town: Kirkcaldy
  • Country: gb
Re: Bike Paddock Stands - or straight for centre stand?
« Reply #9 on: Apr 07, 2021, 12:14 PM »
So, @NI-Jay made his promise and since Tuesday Im proud owner of rear stand what actually fits!
Details were made via private messages, but he deserves a public recognition  :031:

Keep the shiny side up!