Versys Forum

Please login or register.

News: Join Now ! Members have access to areas that guests cannot see.



Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: 32 and 62 error codes need help please  (Read 1056 times)

0 Members and 1 Guest are viewing this topic.

Offline Clunkyboy

  • Versys Mega God
  • ******
  • Posts: 9710
  • Scratchin Bros Rider
  • Country: gb
Re: 32 and 62 error codes need help please
« Reply #10 on: Jan 13, 2022, 07:39 AM »
I dont have a manual for that year but on earlier models section 3-34
The mauals are availble if you do a bit of searching in an "Uber secret resource"  location

To enter the self-diagnosis dealer mode 2, open and
ground [A] the lead more than five times [F] within 2 seconds [C] after the lead is first grounded, and then keep it
grounded continuously [D] for more than 2 seconds.
○Count the blinks of the light (LED) to read the service
code. Keep the auxiliary lead ground until you finish reading the service code.
Auxiliary Lead [E]
Self-diagnosis Terminal [G]
NOTE
○To enter the dealer mode 2 from the dealer mode 1, turn
off the ignition switch once.
Service Code Clearing Procedures
Enter the self-diagnosis dealer mode 2 (see Self
-diagnosis Procedures).
NOTE
○Make sure to keep the grounding until the following
opening and grounding starts.
Pull the clutch lever in more than 5 seconds, and then
release it.
Repeat opening and grounding [A] the lead
(self-diagnosis terminal) more than five times [F] within 2
seconds [C] after the lead is grounded, and then keep it
grounded continuously [D] for more than 2 seconds.
Auxiliary Lead [E]
Self-diagnosis Terminal [G)
MT 5, KH 100, IT 175, XR 250, GPZ 600, GPZ 900, GPZ 750, GSXr 1100, XJ 1100, XJ 1200, Super Tenere, GSX 750, 10YR Break, VERSYS Mk1,VERSYS Mk2

Offline Big T

  • Versys Newbie
  • *
  • Posts: 7
  • Bike: Versy 650
  • City / Town: LEICESTER
  • Country: gb
Re: 32 and 62 error codes need help please
« Reply #11 on: Jan 13, 2022, 07:51 PM »
Dose anyone know if the z650 throttle bodie if the the versys